views:
Only after you understand the structure of the device, you can better apply them, sometimes we can help us to maintain, overhaul, etc., you need to understand the structure of the device before use. The following is a ball mill structure:
1, the feeder
The function of the feeder is to deliver the material into the ball mill body, but the material not only includes the new feed, but also the graded return, feeder It can be divided into three kinds of drum feeders, worm feeders, and combined feeders depending on the shape.
2, the bearing portion
The bearing portion is a combination of a bearing housing, a bearing cap, a lower shaft and a cast iron pin of the Pastellette alloy. The ball mill is not a bearing, which is a shaft, only a small ball mill uses a bearing, which is a general generic bearing. In the journal and the bearing bushing, be sure to ensure timely lubrication. There are many ways to lubricate, generally use the lubrication of the oil concentration, oil cup drops or yarn lubrication.
3, the annular seal
The top end of the main bearing has an annular sealing device, and the purpose is to prevent the ball mill from being pulled in the operation.
4, the feed portion
The material is constantly entering the inside of the cylinder through the feed portion source source. According to the ball mill configuration, it can be seen that the structure of such a device is quite reasonable, such a device can bring good use benefits when used. This kind of equipment has a good role and has also played its advantage during use.
