views:
The ball mill is installed, and the empty trial operation can be carried out, and the trial operation of the ball mill should be performed by the skilled ball mill operators, and strictly abide by the ball mill safety operation procedures.
(1) The continuous operation time of air operation is not less than 12-24 hours, and the problem in operation should be resolved in time. (2) The air transceiver can be carried out normally, and the load trial operation should be carried out in phases. The load should be used to feed the discharge, avoiding the unnecessary abrasive and damage of steel balls and cylindrical liners. .1, add appropriate materials and 1/3 of the number of steel balls (ball spherical paragraph total map) test running 12-24 hours.
2, adding to 2/3 of the number of steel balls running 24-48 hours.3, according to the discharge of the ball mill, the yield of qualified products, refer to the actual ball of the ball mill, determine the reasonable ball of the ball mill, which is not less than 72 hours of trial operation.
(3) The increase in the amount of load and the length of the trial transport time are determined based on the running of the size gear and the gear gear (temperature rise, noise, tooth surface contact, etc.). Do not fully load before the contact accuracy of the tooth surface is not achieved.(4) Cooling in the trial operation, the lubrication system should work normally, the main bearing, the transmission bearing, and the temperature of the reducer should be normal.
(5) After loading 2/3 of the number of steel ball trial transportation 24-48 hours, the whole bolts should be tightened and again.(6) Trial operation should be carefully doing a good job.
The ball mill is mainly used in the mixing and grinding of ceramic raw materials, which is an essential equipment for producing all kinds of ceramic products. The machine uses autobathing decompression, reducing start current, and its structure is integrated and independent. With triangular belt drive, single-stage or double-level deceleration, equipped with loading and unloading independent small power motors.
