What kind of milling work needs to do before the wet ball mill?

The wet ball mill is purchased back, and after the end of the installation, the demand will first run together. The ball mill of the ball mill is to ensure that it is normal production in the future operation, cutting the accident, and prolonging the key elements of service life. Therefore, the operator must have a serious care of it, and it is necessary to make a good care, strictly follow the operational process of the wet ball mill, reduce the problem, stability, and make the equipment more than a business service. Then, the wet ball mill pays attention to what operations during the milling period?

1, during the running-in period, it is necessary to work, and it will continue to operate for 12-24 hours, at work Time presence problems should be resolved in time.

2, when the time of the test work is, the cooling and smooth system must be normal. Before the equipment tooth surface accuracy is not reached, the external environment of the gear and the gear gear is based on the external environment of the gear. It is necessary to make the next step of the next step by viewing the components and equipment work.

3, in the test work, the work of each system must be normal. The temperature of each component must be within the specification, and the parameters of each instrument must also meet the needs. When the polishing body of the moisturizing ball mill is loaded with two-thirds, it works, after working until two days, you should look at the tightness of the fastener, if it is rolling to be tightened.

4, the equipment is carried out in the future, and the load work is required, and it is not allowed to load. At the time of load working, it is necessary to perform in phases, and it is necessary to add a reduction in the operation to avoid unnecessary wear and damage.