views:
Lining is an important part of the cement ball mill operation, and we need to select a ball mill with a material. Some people will say that the material of the liner is not important, and it is important that the liner must have sufficient thickness and can protect the inner cylinders of the equipment. However, from the perspective, the material of the liner is very important, which is directly related to the service life of the equipment.
Some will affect the normal production because there is no choice of lining, so we need to carefully select the ball of the ball mill.
The following from the perspective of the choice of cement ball mills should follow the principle of the selection of the cement ball mill.
1. Selection of the fine material mill. The ground grinding is mainly fine mills of cement clinker, cement raw materials have become spherical, and the hardness is low. During the grinding process of the clinker, it is mainly ground and ultrafine mill. To select a suitable liner for these two mills, you must understand the working principle of these two mills. The clinker is mainly grounded, so the selection of the liner must have powerful toughness, so high carbon alloy steel is a fine mill liner.
2. Write the head liner, the selection of the discharge plate. The grinding head ends at the front end of the bomb bin is large, and the impact is large.
Therefore, when the liner is selected, it should be selected to have a material having high toughness resistance anti-cutting. The primary force of the roster at the grinding machine is mainly derived from the extrusion of steel balls and steel sections, so the choice of the liner should be mainly high hardness. The normal operation of the mill is ensured to a large extent, and the normal operation of the mill can be guaranteed to a large extent. For enterprises, it has improved production benefits to a large extent, which can be said to be a lot.
The ball mill itself has many components, and the full-force fit of each component can ensure the operation of the equipment. The lining can be said to be the core component of the ball mill, and the inner cylinder is not damaged during production, since the inner cylinder is subject to a multi-faceted impact, it will be inevitably subjected to loss.
Therefore, the selection of a material is a good prerequisite for extending the service life of the equipment. In addition, we must mainly repair and maintain equipment on the usual production, and ensure that equipment has been carried out in a good operating state, and create greater value for companies.
