views:
The ceramic ball mill is the ball mill of the ball mill is a ball mill made of ceramics. The capacity is small, which is generally suitable for small volume production of product trial modification. It is another new energy-saving ball mill in China's latest installment technology. The feed device is one of the factors that determine the production of the ball mill. If the material cannot be smoothly sent to the ball mill, the production production of the equipment will also be greatly reduced. The following is some improvement methods for the spherical grinding of the ball mill:
1, from the problem arising from the feed opening, the most important problem is the following son.
2, to increase ventilation, reduce the granularity of the material, and improve the yield of the ball mill, the quality is a key step.
3, when the feed port is installed, there must be a certain angle to make the material in gravity, and put an end to the phenomenon that causes clogging in the import.
4, to improve the ball mill ventilation, many mechanical companies have made great efforts and exploration in this respect.
5, in the grinding head of the ball mill, the blower is combined with the increase of the grinding, which has a better effect, but increases the energy consumption of the fan and the processing difficulty of the dust dust removal system, so The most effective way is to improve the ball mill feed port.
6, change the feed of the feed mouth to the cylindrical tangent type, so that the centralized spiral spiral space is made, and the ball mill has a good ventilation condition.
7. The liner is fixed in the lower half of the small ball mill cylinder to increase the wear resistance of the lower material and the feed port is well protected.
8, in the feed port is introduced into a steel pipe amplifier, in an appropriate time to pass the hot air, reduce the steam in the grinding, reduce the temperature difference of the grinding.
