views:
With the continuous development of the domestic economy, the ball mills that need large outputs are also constantly requiring, through many years of research and development and innovation, we launch advanced wear-resistant large ball mill equipment, specializing in crushing, such as cobblestones, rivers Brainstorm, granite, granite, quartz, limestone, etc. The two ends or one end of the ball mill does not use the usual main bearing support, but the slip support is used. The mill of the slide bearing is operated by a wheel belt support that is fixed on a mill cartridge. The characteristics of the ball mill slip support mainly have the following five:
1) Slide of the support mill There are two, three or four, so its structure is not only fully suitable for small and medium-sized mills, but is not subject to specifications, and can also be employed on a large mill.
2) With the slip support structure, it is possible to cancel the easy-to-damaging grinding head (including the hollow shaft) and the main bearing on the large mill, and the operation is safer, and the length of the mill, especially the feed end of the mill. It is clearly shortened, and it reduces the footprint.
3) For drying and pollining mills, since the hollow shaft is canceled, the break area of \u200b\u200bthe feed port is not bound by the hollow shaft, and therefore, the feed port can be more reasonably designed, which is advantageous for the grinding material. And hot air flow, and reduce ventilation resistance.
4) Because the support spacing of the mill is shortened, the bending moment and stress of the mill body are reduced, and therefore, the thickness of the grinding cylindrical steel sheet can be thin. In particular, drying and pollining mills, the cylinder of the drying bin can use a thinner steel sheet to reduce the weight of the mill.
5) The linear speed of the wheelbase is much higher than the hollow shaft, which is advantageous for the formation of the lubricating oil film.
