views:
After the ball mill reducer is factory-factory, there is usually a milling period (more than time must change), which is specified in the preliminary performance of the reducer. The milling period is an important part of ensuring normal operation, reducing the fault rate, and prolonging the service life. The reducer is used as a ball mill, and in the case of effective protection, the possibility of the fault is relatively small, and the reducer is one of the important cores of the ball mill, and how long is the life of the slower service in use? The outstanding performance of the ball mill in the market is unanimous, and good grinding efficiency has brought great economic benefits to customers. What are the factors affecting the use of reducer? According to years of experience, the following points are summarized:
1, the reduction machine has overloaded phenomena, if there is a large defect, etc.;
2, the reducer is installed, the test process is not strict, the problem of discovery is not timely Performance;
5. Insufficient instrumentation for various indicative instruments, the instrument is incorrect, causing the operation error.
6. Insufficient maintenance and maintenance of the reducer, not checking the operation of the equipment on time;
7, the responsibility system is not perfect, such as post professional, post operation, handover system, safety technology, etc.
8, the lubrication management is not enough, the lubricating oil selection is unreasonable, and the lubrication pipe exit end and the return end screen are not cleaned up in time, and the lubricating oil is not replaced in a timely manner.
