views:
Saving ball mills in the ball mill are also referred to as a cone ball mill, a ceramic ball mill, a cement (material: powder hydraulic inorganic gelation) ball mill, etc. Of course, their use is not the same. The failure and problems that may occur during use during use are more or less. Let's take a look at some of the details of the energy-saving ball mill:
1. Check the wear of a liner in one month, pay attention to replacement in time, in the abrasion damage.
2. Pay attention to the oil supply situation of the oil supply unit, lubrication is not intermitted, and control the \"Bearing) temperature is not higher than 60 degrees Celsius (° C). The ball mill is one of the high fine mills widely used in industrial production, and there are many types. The ball mill differs depending on the mine mode, can be laminated and overflow type.
3. Deceleration (Gear) gear reducer, worm reducer, etc.), lubrication between the main bearing and the drive gear. The ball mill differs depending on the mine mode, can be laminated and overflow type. We recommend using HL-20 (winter) or HL-30 (summer) gear oil.
The person familiar with the work and performance of the energy-saving ball mill should be selected to manipulate, maintain and inspect.
All institutions and devices must be confirmed before the machine is started, and the operation is normal, and the oil supply can be supplied to sufficient oil.
The energy-saving ball mill must operate in accordance with the specified direction, otherwise it cannot be discharged or caused (to contribute to the injure).
4. Working in the case where the mill does not have a super-load and insufficient supply.
5. Status quantitative grinding medium (approximately one per week) (approximately once) from the in-plane hole (one week)
6. Check the fastening of the liner every other month to prevent the liner from falling off.
7. In order to reduce intermittent time, a full set of easy grinding parts should be prepared in the library.
8. Each of the mills is good. The ball mill differs depending on the mine mode, can be laminated and overflow type. The ball mill is suitable for polishing various ore and other materials, which are widely used in different industries such as mineralization, building materials and chemicals, can be divided into dry and wet-forming milling methods.
9. Lubricating oil should be filtered regularly (available 2-3 gauze)
10. Special pay special attention to daily maintenance, machine investment production (Produce) should be used to develop strict machine maintenance plans, and Effectively implement this plan, ensuring that machines often work in normal conditions, playing its greatest efficiency and extending its service life, can improve work efficiency to play a half-time effect.
Related Articles: Ball mill price, small ball mill, overflow ball mill, intermittent ball mill, dry ball mill
Engaged in energy saving ballGrinder, ceramic (raw material: non-metal mineral) ball mill, tapered ball mill and other ball mill equipment for more than 30 years, with more than ten kinds of ball mill advanced patents (meaning: public letter or public literature) certificate, leading the production of domestic ball mill production(Produce) Enterprise, quality quality, perfect after-sales, escort your equipment and production!
