views:
Energy-saving ball mill is now very good distribution and mortems. We said that the ball mill will inevitably have a failure, how to avoid the biggest problem, and the energy-saving ball mill is simple. The operation is convenient to become the largest feature. The ball mill differs depending on the mine mode, can be laminated and overflow type. The ore (ORE) material is grinding to a small particle, allowing customers to get high profits. Our experts summarize the solutions for energy-saving ball mills in accordance with Multi-year experience (Experience).
Several cases of energy saving ball mills happen:
A After a period of operation, the spray holes on the insole tube are blocked, the oil pressure rises, the flow of other holes (unit: cubic meters per second) The oils under the drum of the oil ring are splashing into the oil ring. The ball mill is suitable for polishing various ore and other materials, which are widely used in different industries such as mineralization, building materials and chemicals, can be divided into dry and wet-forming milling methods. At this time, if the small throttle will reduce the amount of lubrication oil, it is not advisable to increase the rising tile rise.
B The current (after) the opening of the tile gas is large, the amount of injector is increased, and the oil is drifted from the spray hole to the felt oil, leakage from the felt oil.
c From the above case, it can be seen that the lubricating oil is splashing to the peak ring. If you can add an oil-resistant rubber sheet between the oil ring and the injector tube, the oil will not splash into the oil row; if the fuel injection aperture is expanded, it will not block the hydraulic pressure. It will not be infiltrated.
Faulture Processing method:
A Plug 30 pieces of spray holes, then the remaining 15 apertures from \u0026 phi; 4 to \u0026 pHI; 6. After calculating the total area of \u200b\u200bthe spray hole, it has increased by 12.5%, and the amount of lubricant is not reduced.
b In order to test the test effect, the front and rear tile throttle is all open, the oil pressure is adjusted to 0.25 MPa, and the front and rear tiles do not leak. The ball mill is one of the high fine mills widely used in industrial production, and there are many types. Until now, there is no drip of oil before and after the three years. It turns out that this transformation is successful.
C is a clip of two clampable-resistant rubber (Rubber) boards. The ball mill differs depending on the mine mode, can be laminated and overflow type. With 30 angiom iron and 30 flat iron, it is 400 mm to drill 5 \u0026 pHI; 8 holes together. The oil resistant rubber plate length 400mm width is the injection tube to the hollow axis distance. Then cut the other side length 400 side into a curved shape (explained: is an elegant line), the arc is a hollow axial curness. Welding the angle iron on both sides of the injector tube, the oil ring is above. Use angle iron and flat iron clamping resistant rubber plates andUse 5 M8 bolts to make it close to the oil ring.
D appropriately calm the small tuning door until the splash.The ball mill is suitable for polishing various ore and other materials, which are widely used in different industries such as mineralization, building materials and chemicals, can be divided into dry and wet-forming milling methods.However, the damaged door is small to a certain extent, so that the lubricant is insufficient, so that the temperature of the large watt is raised, and if the monitoring will cause a roasting accident in no circumference.Therefore, the adjustment of the throttle opening must be carried out by experience.
Engaged in energy-saving ball mill, ceramic (raw material: non-metallic mineral) ball mill, tapered ball mill and other ball mill equipment, with advanced patents of ball mill (meaning: public letter or public literature) certificateMore than ten, leading the industry's domestic ball mill production (Produce) enterprise, quality quality, perfect after-sales, escorting your equipment and production!
