views:
In order to enable the use of the entire rustic mill to be carried out, it is necessary to take a certain time to do a certain time before use, it is necessary to take a certain time to test. Let's take a specific introduction to its test requirements:
1. A no-load test
The airborne test is carried out without the material, and it should be achieved as follows:
1, start and park according to normal procedures, The rod mill electrical chain system should meet the design requirements.
2, all fasteners should be firm and reliable, no loosening.
3, the transmission mechanism works fine.
4, the bearing operating temperature does not exceed 75 ° C.
5, the bearing lubrication is normal without oil leakage.
6, after two hours of air turn, turn off and rotated for 10 minutes, check whether the reverse control function is ideal.
Second, the load test
rod mill load test should be conducted after passing the no-load test, in addition to meeting the requirements of the load test, but also needs to meet the following requirements:
1, significant vibration and should Unusual sound.
2, the amount of feed is correct, the discharge is normal.
The above introduces the requirements of the rod mill test, when we test the car, we must test in accordance with the test car, and during the test, we need to process it in time to ensure its normal operation.
