views:
The rod mill is used in some industries. This equipment needs to add steel rods to the equipment when grinding some materials, and the steel rod has played a critical role in the entire device, when the steel rod is added,User needs to abide by the following principles.
1, if the rod mill is bold during the operation, plus the stick is only bold, because the borders that have been previously added have been grinded, so there is no need to add a thin stick.
2, if it is initially wear, press 55/65 / 75mm 3: 4: 3.
3, as for a long time, this is not standard, you have to sum up experience in the initial stage, usually a thinner stick to 40mm, stop, pumping fine steel rods from the rod, picked outHow many roots are added to 75mm.
When the rod mill is added to the correct method, it is also necessary to add according to the correct method, and the model size of the device needs to be added according to a certain ratio, and after the above principle, it can makeThe equipment is grinded finer.
