views:
Now there are many industries that need to be ground into powder, and can operate this material using a rod mill. When using it to graze the material, a certain amount of load is generated. In order to prevent overload operation, it is necessary to detect its load..Let's introduce it to its load detection work.
1, detecting the current value in the motor circuit of the rod mill.
2, direct use of the tangometer to indicate the level in the cavity, knowing its load.
3, with a belt scale, weigh the amount of the rod mill feeds the belt conveyor.
4, by calculation, the circulating load of the screening system is obtained.
Load detection is a step of using a rod mill when it is necessary, and the device can be checked in time, which can be taken in time, which can be taken in time to reduce the phenomenon of overload.
