views:
There are many accessories in the ball mill, and there is still a long time. There are some wear, rust, etc., in order to protect the accessories, in order to protect the entire equipment, we must make a good lubrication, so you can improve them. Use efficiency. How to do your equipment lubrication?
1, the bearing of the brake hanging axis of the ball mill usually uses the butter cup to refuel, about every 40-60 min. The elbow of the thrust plate is dropped with a thickness of oil, which is generally dropped once every 3-4h.
2, before the device is started, the elbolar is adjusted to the elbow pads; the grease should be added; the lubricating oil to the bearing housing should be 50-70% of the volume, replace it every 3 to 6 months. When replacing the grease, apply clean gasoline or kerosene to clean the part of the bearing, and should open the housing under the bearing hole, and clean all parts and then replace the new lubricant.
3, when the oil pump suddenly fails during the lubrication, the ball mill can be stopped because the swing force is 15-20 min, and the oil pump is pumped by hand, so that the bearing keeps lubrication and the burn the bearing. accident.
4, can be added to the lubricating oil in winter, avoid lubricating oil solidification, and must do a seal after the lubricating oil is added, avoiding dust into entering so as not to affect the lubrication effect. Pay attention to the oil temperature of the lubricant when working in the ball mill, and the oil temperature cannot be too high to control below 60 degrees.
5, often pay attention to the lubrication of friction surface in time, ensuring the normal operation of the machine and prolonging the service life of the machine. The appropriate amount of grease is added every 400 hours during the production process; each work is 2000 hours, the spindle assembly is opened to clean the bearing; the new bearing is replaced for 7200 hours.
In order to be able to do a good job in the lubrication of the ball mill, we must choose a suitable type of lubrication product when selecting a lubricating oil or a grease, and also requires regular oil transfer, timely cleaning the accessories, prevent dust from mixing the dust, etc. The device has a negative impact.
