views:
The rod mill is processed in a suitable manner to make it thinner. In the process of use, if we can know the relevant main control points, then our device will get a better role in everyday use. Here we need we know the main control points of the device:
1. First, the maintenance of the rod mill should take the correct method. At the same time, it is necessary to pay attention to the temperature of the rod mill gearbox and each of the partial shafts. Temperature, if the abnormal phenomenon should be dealt in time, otherwise it will affect normal operation.
2, when performing the replacement of the shaft tile, the mutual research between the shaft watts and the shaft must be maintained, so that the equipment is more efficient, especially between hollow shafts and hollow shafts.
3, the rod mill can occur after a period of time, there may be an unprecedented phenomenon of size gears, so the parallelism of the large and small gears should be checked when maintaining the ball mill. In addition, pay attention to whether the transmission shaft is smooth. .
4, replacement of lubricants should be carried out according to their usage, do not replace experience, which will cause waste of resources or damage to the equipment. Having a good lubrication state increases the life of the equipment.
The above is the main control point of the rod mill. You need to do the corresponding maintenance work, replace it out of your own accessories. When we master its control points, we can effectively improve its efficiency.
