views:
When the ball mill is running, the motor is also running at the same time. After the usage time is long, the motor is easily heated, and the motor is not good after the motor is still in the long time, whether it is not good for the motor itself. What are the techniques to prevent the heat of the motor?
1. When purchasing a ball mill, the model should be supported with the motor. If the motor is small or large, it is easy to fail, such as the phenomenon of the motor and even burnt down;
2, install the installation to carry out the guidance of professional people Installation and commissioning;
3, ball mill fan leaves fall or wear can also cause fever of the ball mill motor, then check that the motor fan leaves are not falling off or wear, find problems to be handled in time;
4, if the motor power Big, will have excessive wind speed, and it is not as follows from the wind speed. It has been blown back, resulting in low yield, retransmond, repeatedly repeatedly causes the material to cause the motor.
These are the techniques that prevent the ball mills from fever, and should also be installed correctly when used, when choosing the motor, according to the model itself, requires the same model, and use it in a ventilated environment.
